Ragan & Massey Compare-N-Save Concentrate Grass and Weed Killer 41% Glyphosate

Ragan & Massey Compare-N-Save Concentrate Grass and Weed Killer 41% Glyphosate

Ragan & Massey

SKU: 13856059 UPC: 00737716753233

Available Inventory: Low Stock

$19.25
Unit price per

Options

Get to the root and kill grass and weeds with Compare-N-Save 41-percent Glyphosate Concentrate Grass and Weed Killer. Use for lawn or garden replacement, on patios, walkways, or in and around fences and gardens to remove unwanted grass and weeds.

Visible results in as little as 2 to 4 days.
Kills all grass and weeds.
Rainproof in 2 hours
Contains 41-percent glyphosate

For Best Results: For best results, apply on a warm sunny day when daytime temperature is above 60°F and no rainfall is forecast for 24 hours. Because this herbicide will kill all green plants including lawn grass it is not recommended for spot spraying in lawns.

Kills To The Root: Be sure to spray the foliage of the treated plants and avoid any spray mist drifting to plants you do not wish to treat. Glyphosate is absorbed through the foliage and travels to the root to kill the plant.

Mixes Easily With Water: Use 1.5 ounces (3 tablespoons) of concentrate in 1 gallon of water for general weed control. For tougher weed control of perennials or brush, mix 2.5 ounces (5 tablespoons) in 1 gallon of water. One gallon of ready-to-use equivalent will cover 300 square feet.

No Residual Activity: Glyphosate is a post-emergent herbicide. It will not prevent new or future growth. Treated areas can be replanted in as little as one day in ornamental areas. See the label for a complete list of when to replant fruits and vegetables.

WHERE TO USE:

Around farm buildings and barns	Driveways	Agricultural uncultivated areas
Ornamental gardens	Gravel paths	For establishment and maintenance of wildlife openings.
Roadsides	Along fences	Walkways
Parking areas	Farmyards	Mulch beds
Vacant lots	Lawn replacement

WHEN TO USE:

Use any time weeds are actively growing. Most treated weeds show initial symptoms in 2 to 4 days and complete kill in 1 to 2 weeks. Larger more established weeds may take up to 4 weeks for complete kill.

For best results, apply on a warm, sunny day when daytime temperature is above 60°F and no rainfall is forecast for 24 hours. Warm, sunny weather will speed up weed control.

Apply only when air is calm. If necessary, use cardboard or plastic to shield desirable plants.

Reapply if it rains within 2 hours after application. Rainfall or watering 2 hours after application will not wash away effectiveness.

HOW TO USE:

To apply this product, use

Plastic, aluminum or stainless steel tank sprayer
Other hose-end sprayer recommended for weed killers
Hand-trigger sprayer

Do not use or store solutions of this product in galvanized steel or unlined steel sprayers, or apply through any type of irrigation system or with a sprinkling can.

Rinse sprayer and flush all sprayer components with water 3 times after use. Spray rinse water on bare soil or gravel. After very thorough cleaning, sprayer may be used to apply other products. Close cap tightly after use.

General Weed Control

Use along fences, paths, patios, sidewalks, driveways and in brick and gravel walkways, around trees, shrubs, ornamental plantings and flower beds, and around buildings. Use to trim and edge landscape areas.

Spot Spraying

Use on actively growing weeds in and around flower beds, ornamental trees, fruit and nut trees, grapevines, shrubs, fences, driveways and walkways. Make sure Concentrate Grass & Weed Killer 41% Glyphosate does not contact the leaves, green stems or exposed roots of plants you don’t want to kill. Concentrate Grass & Weed Killer 41% Glyphosate will not move in or on the soil to untreated plants. If used to control weeds around fruit or nut trees or grapevines, allow 21 days before eating the fruit or nuts.

Landscaping

Use to prepare areas for planting of ornamentals, trees, shrubs, desert landscapes, rock gardens, flower beds or similar plantings. Treated areas can be replanted 1 day after treatment.

Lawn Renovation

Use to kill existing weeds and grasses including the old lawn. For best results, apply in spring or fall, when daytime temperatures are at least 60°F. See label for complete lawn renovation instructions.

Brush Control

Use when brush is green and growing. If plants are taller than 5 feet, cut back and spray regrowth. Brush sprayed in the fall may not be fully controlled until the following season. Hard-to-control species such as blackberry, kudzu or poison oak may require a second application.

Stump Treatment

Stumps can be treated to prevent regrowth. For best results, treat when the vegetation is actively growing and within 5 minutes of being cut down. See label for further instructions. Treatment will control or suppress many types of woody brush and trees, such as alder, bluegum, eucalyptus, madrone, oak, giant reed, saltcedar, sweetgum and tan oak.

Vine Control

If vine is growing up a pole, fences, or mature tree trunk, cut vine to a height of 3 to 4 feet and spray to thoroughly cover remaining vine.
If vine is climbing a shrub or immature (green) tree trunk, cut vines at base and spray its regrowth. Shield shrubs and green bark from spray drift with a sheet of cardboard or plastic.

PRECAUTIONS:

Concentrate Grass & Weed Killer 41% Glyphosate is an all-purpose weed and grass killer which will kill almost all plants it contacts. DO NOT use for spot weed control in lawns since Concentrate Grass & Weed Killer 41% Glyphosate kills all green plants, including lawn grass.

If necessary, use cardboard or plastic to shield desirable plants. If plants are accidentally sprayed, rinse off immediately with water. Spray when air is calm. Spray to evenly wet the weed.

ACTIVE INGREDIENTS:

Glyphosate, isopropylamine salt	41.0%
Other Ingredients	59.0%
Total:	100.0%

DISCLAIMER:

It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Read the entire label before each use. Use only according to label instructions.

See the complete label for specific use rates and detailed instructions.

Consult the Safety Data Sheet (SDS) for important safety information.